Aastra Venture 3-Line with Answering User Manual page 76

NOTICE : The Ringer Equivalence
Number (REN) assigned to each
terminal device denotes the
percentage of the total load to be
connected to a telephone loop which
is used by the device, to prevent
overloading. The termination of a
loop may consist of any combination
of devices subject only to the
requirement that the sum of the REN
of all the devices does not exceed
100.
This telephone has been tested and
found to comply with the limits for a
Class B digital device in accordance
with the Canadian EMI requirement
ICES-003.
CAUTION :
To eliminate the
possibility of accidental damage to
cords, plugs, jacks and the telephone,
do not use sharp instruments during
the assembly procedures.
WARNING :
Do not insert the plug
at the free end of the receiver cord
directly into a wall or baseboard jack.
Such misuse can result in unsafe
sound levels
The exclamation point
within an equilateral
triangle is intended to
alert the user to the
presence of important
operating and
maintenance (serving)
instruction in the literature
accompanying the
product.
This symbol on the product is also
used to identify the following
important information:
Shock Hazard Warning:
To avoid potential electrical shock
hazard to personnel or damage to the
telephone, use only the manufacturer
supplied equipment and installation
procedures. Specifically, use only 6
conductor modular Teladapt plug/
cords with this product, and the AC
transformer must be CSA/UL or
CSA-NRTL/C approved Class 2,
level C, rated as follows:
Venture 3-Line Telephone with Answering Device User Guide 75
For North American Markets mains
nominal AC voltage 110-117V:
For Venture- Input: 117/120VAC,
50/60Hz, 12W and Output: 16VAC
500 mA.
For International Markets mains
nominal AC voltage 220-240V:
For Venture- Input: 220/240VAC,
50/60Hz, 12W and Output: 16VAC
500 mA.
Substitution of non approved
equipment will void the Aastra
warranty.
For warranty and repairs in Canada
call: 1-800-574-1611.