Setting Up Your Phone - Aastra Venture 3-Line with Answering User Manual

5. Plug the other end of the black
short 8-wire cord into the CAM
port on the back of your phone.
6. Plug the power adapter cord into
the power adapter port on the
CAM.
7. Press the cord into the channel
provided.
8. Plug the power adapter into an
electrical outlet.
9. Plug one end of the grey short 6-
wire cord into CAM port 1.
10. Plug the other end of the grey
short 6-wire cord into the wall-
mount jack.
11. Align the slots on the back of the
phone with the studs on the wall-
mount plate.
12. Slide the phone down until it
locks into place.
The stand is not used when wall
mounting your Venture.

Setting up your phone

Once you have made all the physical
connections required and powered up
your phone, your display shows:
1. Press *, # or 1 to select your
preferred language.
You can change the language at
any time by accessing the
Options list and selecting a new
language under Option 28.
Venture 3-Line Telephone with Answering Device User Guide 13
2. The display now shows:
3. Enter a number between 01 and
99 for the phone ID—a different
two digit number for each
Venture set in your system.
The display shows
while it confirms that the two-
digit number you entered has not
been used for another phone.
When the phone has finished
checking, the display shows
.
If your display shows
instead of , enter a
different phone ID number.