Jumper Definitions; Led Definitions; Power/Ide Led Definitions; Table 2-5. Jumper Settings - Ampro ReadyBoard 700 Reference Manual

Chapter 2

Jumper Definitions

Table 2-5 describes the jumpers shown in Figure 2-6. Refer to the Oops! Jumper to clear the BIOS.

Table 2-5. Jumper Settings

Jumper #
JP1 – TFT/LCD Clock
JP2 – LCD Voltage Type
JP3 – CMOS Normal/Clear
JP4 – CF Master/Slave
JP5 – Flash BIOS
JP6 – COM3 RS485
JP6 – COM4 RS485

LED Definitions

Tables 2-6 and 2-7 provide the LED colors and definitions for the Ethernet ports, Port 1 (J10) and Port 2
(J11) located on the ReadyBoard 700. Refer to Figures 2-4 and 2-8.

Table 2-6. Ethernet Port 1 (J10) LED Indicators

Indicator
Ethernet
Link/Activity
LED
Ethernet
Speed LED

Table 2-7. Ethernet Port 2 (J11) LED Indicators

Indicator
Ethernet
Link/Activity
LED
Ethernet
Speed LED

Power/IDE LED Definitions

Table 2-8. Power/IDE Activity LED Indicators (D4)

LED#
LED stack (D4)
LED stack (D4)
14
Installed
Clock Invert (pins 1-2)
Enable +3.3V (pins 1-2) Default
Normal (pins 1-2) Default
Master (pins 1-2) Default
Internal (pins 1-2) Default
Termination (pins 1-2)
Termination (pins 3-4)
Definition
Link/Activity LED – This yellow LED is the activity/link indicator
and provides the status of Ethernet port 1 (J10).
A steady On LED indicates a link is established
A flashing LED indicates active data transfers
Speed LED – This green LED is the Speed indictor and indicates
transmit or receive speed of Ethernet port 1 (J10).
A steady Off LED indicates the port is at 10BaseT speed
A steady On LED indicates the port is at 100BaseT speed
Definition
Link/Activity LED – This yellow LED is the activity/link indicator
and provides the status of Ethernet port 2 (J11).
A steady On LED indicates a link is established
A flashing LED indicates active data transfers
Speed LED – This green LED is the Speed indictor and indicates
transmit or receive speed of Ethernet port 2 (J11).
A steady Off LED indicates the port is at 10BaseT speed
A steady On LED indicates the port is at 100BaseT speed
Activity
Steady Green = Power On
Flashing Yellow = IDE activity
(IDE drive or CompactFlash)
Reference Manual
Product Overview
Removed
Clock Normal (pins 2-3) Default
Enable +5V (2-3)
Clears Time & Date only (pins 2-3)
Slave (removed)
External (removed)
No Termination (removed) Default
No Termination (removed) Default
No Activity
Steady Off = Power Off
Steady Off = No IDE activity
ReadyBoard 700