User Gpio Signals (J2); Temperature Monitoring; Serial Console; Figure 3-2. Oops! Jumper Connection - Ampro ReadyBoard 700 Reference Manual

Single board computer
Table of Contents

Advertisement

Chapter 3

User GPIO Signals (J2)

The ReadyBoard 700 provides eight GPIO pins for custom use and the signals are routed to connector
J2. There is an example of how to use the GPIO pins in the Miscellaneous Source Code Examples
subdirectory, under the ReadyBoard 700 Software menu on the ReadyBoard 700 Doc & SW CD-ROM,
(RB700\software\examples\GPIO)
The example program can be built by using the make.bat file. This produces a 16-bit DOS executable
application, gpio.exe, which can be run on the ReadyBoard 700 to demonstrate the use of GPIO pins.
For more information about the GPIO pin operation, refer to the Programming Manual for the Secondary
I/O (W83877TF) controller at:
http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/877tf.pdf

Table 3-26. User GPIO Signals Pin/Signal Descriptions (J2)

Pin #
Signal
1
GND
2
+5V
3
GPIO0
4
GPIO1
5
GPIO2
6
GPIO3
7
GPIO4
8
GPIO5
9
GPIO6
10
GPIO7
Notes: The shaded area denotes power or ground.

Temperature Monitoring

The Southbridge (VIA VT82C686B) chip performs the temperature monitoring function and has inputs
directly from two thermistors on the board. One thermistor is located near the CPU and the other
thermistor is located near the Southbridge.
NOTE
The ReadyBoard 700 requires a heatsink for all Intel processors
(Celeron, Pentium III) and the Northbridges, but no fan.

Serial Console

The ReadyBoard 700 supports the serial console (or console redirection) feature. This I/O function is
provided by an ANSI-compatible serial terminal, or the equivalent terminal emulation software running
on another system. This can be very useful when setting up the BIOS on a production line for systems
that are not connected to a keyboard and display.
ReadyBoard 700
Serial 1 (J5A) Lower Port
Standard DB9 Serial Port Connector
(Female)
Rear View

Figure 3-2. Oops! Jumper Connection

Description
Ground
+5 VDC
User defined
User defined
User defined
User defined
User defined
User defined
User defined
User defined
Reference Manual
1
2
3
(COM1)
6
7
8
Hardware
5
4
9
51

Advertisement

Table of Contents
loading

Table of Contents