Specifications; Physical Specifications; Power Specifications; Environmental Specifications - Ampro ReadyBoard 700 Reference Manual

Chapter 2

Specifications

Physical Specifications

Table 2-9 lists the physical dimensions of the board. Figures 2-7 and 2-8 give the mounting dimensions,
including side views, and Figure 2-7 shows the pin-1 connector locations.

Table 2-9. Weight and Footprint Dimensions

Item
Weight
Height (PC/104-Plus)
Height (Overall)
Width
Length
Thickness

Power Specifications

Table 2-10 lists the ReadyBoard 700 power requirements.

Table 2-10. Power Supply Requirements

Parameter
Input Type
In-rush Current* Typical 1.9A (9.5W)
BIT** Current
Notes: *In-rush measured with video, 64MB memory, and power connected. **The BIT (burn in test)
is conducted with 64MB SODIMM SDRAM, floppy, USB HDD, CD-ROM, keyboard, mouse, serial
loopbacks, USB CompactFlash card (64MB), two Ethernet channels connected using Win2k OS.

Environmental Specifications

Table 2-11 provides the most efficient operating and storage condition ranges required for this board.

Table 2-11. Environmental Requirements

Processor
Operating
Storage
Operating
Non-operating
16
Dimension
0.272kg. (0.60lb)
15.64mm (0.616")
28.75mm (1.132")
115mm (4.5")
165mm (6.5")
1.574mm (0.062")
400MHz Celeron
Characteristics
Regulated DC voltages
Typical 2.11A (10.57W)
400MHz Celeron
Conditions
+0 to+60 C
(32 to+140 F)
–20°to+75°C
(–4 to+167 F)
20% to 80%
relative humidity,
non-condensing
5% to 95%
relative humidity,
non-condensing
Reference Manual
NOTE
Overall height is measured from the
upper board surface to the highest
permanent component (Serial J5A/B
connectors) on the upper board
surface. This measurement does not
include the heatsinks available for
this board. The heatsink could
increase this dimension.
650MHz Celeron
Characteristics
Regulated DC voltages
Typical 1.8A (9W)
Typical 2.55A (12.73W)
650MHz Celeron
Conditions
+0 to+60 C
(32 to+140 F)
–20°to+75°C
(–4 to+167 F)
20% to 80%
relative humidity,
non-condensing
5% to 95%
relative humidity,
non-condensing
Product Overview
933MHz Pentium III
Characteristics
Regulated DC voltages
Typical 1.94A (9.7W)
Typical 3.5A (17.5W)
933MHz Pentium
III Conditions
+0 to+60 C
(32 to+140 F)
–20°to+75°C
(–4 to+167 F)
20% to 80%
relative humidity,
non-condensing
5% to 95%
relative humidity,
non-condensing
ReadyBoard 700