Installing the Server Blade and Options
NOTE: The server blade ships with at least two DIMMs installed in DIMM slots 1A
and 2A.
•
Install the DIMMs in the paired banks in sequential order.
Installing DIMMs
Before installing DIMMs, review the "DIMM Installation Guidelines" section in this
chapter.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the
internal system components to cool before touching them.
CAUTION: Electrostatic discharge can damage electronic components. Properly
ground yourself before beginning any installation procedure. Refer to Appendix B,
"Electrostatic Discharge," for more information.
2-10
CAUTION: Use only Compaq DIMMs. DIMMs from other sources are known to
adversely affect data integrity.
Compaq ProLiant BL20p Server Blade Setup and Installation Guide