Table of Contents
Advertisement
Deployment Procedure
To perform a diskette or diskette image deployment:
1. Do one of the following:
— Insert the boot diskette into the client PC from which you are running the
iLO Remote Console.
— Use iLO to create an image file of the boot diskette.
— Copy the image of the boot diskette to a location on the network or the client
PC hard drive.
2. Access the server blade through the iLO Remote Console. Refer to the
"Accessing the Server Blade with iLO Remote Console" section in this chapter.
3. Select the Virtual Devices tab.
4. Select Virtual Media.
5. Use the Virtual Media applet to select the local diskette or image file and connect
the Virtual Floppy to the server blade.
6. Use the iLO Virtual Power Button feature to reboot the server blade.
7. After the server blade boots, follow the normal network installation procedure for
the operating system.
Compaq ProLiant BL20p Server Blade Setup and Installation Guide
Configuring and Deploying Server Blades
3-9
Advertisement
Table of Contents
