Table of Contents
Advertisement
Configuring and Deploying Server Blades
IMPORTANT: If you have forgotten the iLO access values or cannot gain access to the
iLO, use the iLO switch (SW2) on the server blade system board to override iLO security.
Refer to Appendix E, "LEDs and Switches."
2. From the administrator workstation or client PC, open a web browser.
3. Browse to the iLO Remote Console using one of the following methods:
— The DNS name provided on the iLO Default Network Settings tag
— The IP address previously configured (if you are not using DHCP)
— The IP address assigned by the DHCP server
— The IP address from the iLO Diagnostic Cable (if you are using the
Diagnostic Port)
4. When the certificate screen appears, accept the certificate.
5. At the login screen, enter the default user ID and default password provided on
the iLO Default Network Settings tag.
6. At the main screen, select the Remote Console tab.
7. Follow the on-screen directions. Refer to the Compaq Integrated Lights-Out User
Guide that ships on the Documentation CD.
Software and Utilities
This section provides information about the following utilities and support tools:
•
RBSU
•
iLO RBSU
•
Option ROM Configuration for Arrays (ORCA) Utility
•
Redundant ROM Support
•
ROMPaq™ Utility
•
Compaq Insight Manager 7
•
Compaq Diagnostics Utility
3-14
Compaq ProLiant BL20p Server Blade Setup and Installation Guide
Advertisement
Table of Contents
