Table of Contents
Advertisement
To access internal server blade components:
IMPORTANT: If the server blade is not installed in the server blade enclosure, begin with
step 4.
1. Identify the proper server blade in the server blade enclosure.
2. Remove power from the server blade in one of the following ways:
— Use the virtual power button feature in the iLO remote console to power
down the server blade from a remote location. Be sure that the server blade is
in standby mode by observing that the power LED is amber. For iLO
information and procedures, refer to the Compaq Integrated Lights-Out User
Guide.
— Press the Power On/Standby button on the front of the server blade. Be sure
that the server blade is in standby mode by observing that the power LED is
amber.
Figure 2-1: Pressing the Power On/Standby button
Compaq ProLiant BL20p Server Blade Setup and Installation Guide
Installing the Server Blade and Options
2-3
Advertisement
Table of Contents
