Table of Contents
Advertisement
Table D-4: Is the Server Blade Internal Health LED Solid Green?
Answer
No, it is amber.
Compaq ProLiant BL20p Server Blade Setup and Installation Guide
Possible Reasons
A processor is in pre-failure
condition.
A DIMM is in pre-failure condition.
One memory bank is valid, but
another bank is missing a DIMM.
One memory bank is valid, but
another bank has mismatched
DIMMs installed.
One memory bank is valid, but
another bank has an unsupported
DIMM type installed.
Possible Solutions
Do the following:
1.
Remove the server blade from the
enclosure.
2.
With the system powered down,
remove the access panel.
3.
Visually inspect the system for
damage.
4.
Reseat or replace processors
and/or DIMMs.
5.
Be sure that the proper connections
exist among the power converter
module, system board, SCSI
backplane, and power button/LED
board.
6.
Reinstall the access panel.
7.
Reinstall and power up the server
blade.
If the health LED is still not solid green,
do one of the following:
•
Use the optional diagnostic station
to power the server blade and use
the iLO remote console to continue
the diagnosis.
•
Contact a Compaq authorized
service provider for replacement
parts and service.
Troubleshooting
continued
D-7
Advertisement
Table of Contents
