Table of Contents
Advertisement
Configuring and Deploying Server Blades
Events listed in the IML are categorized as one of four event severity levels:
•
Status indicates that the message is informational only
•
Repaired indicates that corrective action was taken
•
Caution indicates a non-fatal error condition occurred
•
Critical indicates a component failure has occurred
Viewing the Log
You can view recorded events in the IML in several ways, including the following:
•
From within the iLO Web pages
•
From within the Compaq Insight Manager 7
•
From within the Compaq Survey Utility
•
From within operating system specific IML viewers
— For Windows 2000, Event Viewer, or Compaq IML Viewer
— For Linux operating systems, Compaq IML Viewer Application
Compaq Insight Manager 7
Compaq Insight Manager 7 is a server blade management tool that provides in-depth
fault, configuration, and performance monitoring of hundreds of Compaq server
blades from a single management console. The system parameters that are monitored
describe the status of all key server blade components. By being able to view the
events that occur to these components, you can take immediate action.
Use the instructions in the following section to view and print the event list from
within Compaq Insight Manager 7. You can also mark a critical or caution event as
repaired after the affected component has been replaced. For example, when a failed
DIMM is replaced, you can mark the event as repaired, which lowers the severity of
the event.
NOTE: You can only view the list from the Recovery/Integrated Management Log screen.
3-24
Compaq ProLiant BL20p Server Blade Setup and Installation Guide
Advertisement
Table of Contents
