Table of Contents
Advertisement
Figure 2-6: DIMM slots
Table 2-2: DIMM Slots
Item
1
2
3
4
DIMM Installation Guidelines
You must observe the following guidelines when installing additional memory:
•
Install only 133-MHz registered SDRAM, 3.3-V, 72-bit wide, ECC DIMMs in
the server blade.
•
Install identical DIMMs as pairs only.
IMPORTANT: Install identical DIMMs in slots 1A and 2A. You can install a second set of
identical DIMMs in slots 3B and 4B.
•
Populate both slots in a bank at the same time.
Compaq ProLiant BL20p Server Blade Setup and Installation Guide
Description
DIMM slot 1A (populated)
DIMM slot 2A (populated)
DIMM slot 3B
DIMM slot 4B
Installing the Server Blade and Options
2-9
Advertisement
Table of Contents
