Table of Contents
Advertisement
To install a DIMM:
1. Access the internal server blade components. Refer to the "Preparation
Procedures" section in this chapter.
2. Open the DIMM slot latches.
3. Align the key slot in the bottom edge of the DIMM with the tab in the DIMM
slot.
IMPORTANT: DIMMs do not seat if turned the wrong way.
4. Insert the DIMM into the DIMM slot (1).
5. Press down firmly. When the DIMM seats fully in the slot, the latches close (2).
Figure 2-7: Installing a DIMM
6. Reinstall the access panel. Refer to the "Installing the Access Panel" section in
this chapter.
Compaq ProLiant BL20p Server Blade Setup and Installation Guide
Installing the Server Blade and Options
2-11
Advertisement
Table of Contents
