Adobe 22002420 - Acrobat Standard - PC User Manual page 304

Snap Enables options in the 3D Measurement Tool palette
3D Snap To Edge Endpoints
3D Snap To Linear Edges
3D Snap To Radial Edges
3D Snap To Silhouettes
3D Snap To Planar Faces
Measurement Types options in the 3D Measurement Tool palette
3D Point To Point Measurement
set a start point and then click another location to set an end point or edge.
3D Perpendicular Dimension
Measures the radius at the location clicked.
3D Radial Dimension
3D Angle Measurement
Units And Markup options in the 3D Measurement Tool palette
Note: If you do not see these settings, choose Show Details on the palette's Options menu.
Shows the relationship between units in the model and real object measurements. Use the
Model Units Scale Ratio
Display Units menu to select a different unit for the real object measurements.
Select to have the measurements appear as comments in the PDF.
Measurement Markup
Type text that you want to appear with the measurement, both in the 3D model area and in the Comments
Label
panel. (Not available if Measurement Markup is not selected.)
3D Measurement Tool viewing options
Use the Options menu in the 3D Measurement tool palette to set viewing options.
Note: The 3D Measurement Tool palette changes to the Distance Tool palette after a brief delay when the pointer moves
outside the canvas area of the 3D model. Moving the pointer back over the 3D model restores the 3D Measurement Tool
options. The Ortho option is available only for the 2D Distance, Perimeter, and Area tools.
Shows or hides the Cursor Location and Units And Markup Settings options in the 3D Measurement
Show Details
Tool palette.
Shows or hides vertical and horizontal rulers on the page. (Has the same effect as choosing View >
Show Rulers
Rulers.)
Ensures precise measurement in 2D objects.
Snap To 2D Content
Ensures precise measurement in 3D objects
Snap To 3D Content
3D Measurement Navigation Tips
these shortcuts while you are measuring.
Snaps to the entire edge.
Snaps to a straight-line segment of an edge.
Snaps to a circumference.
Snaps to the apparent edge of a part, such as the side of a cylinder.
Snaps to the geometric plane making up a face of the part.
Measures the distance between two positions on the 3D model that you click to
Measures the distance between two edges taken at a right angle to the starting edge.
Measures the angle between two edges.
Opens a dialog box with keyboard shortcuts for several 3D features. You can use
ADOBE ACROBAT 8 STANDARD
User Guide
298