HP LC2000r - NetServer - 128 MB RAM Configuration Manual page 48

4. If you:
want to define another array, click Back and repeat the steps listed above starting with step 3 in
Define an Array.
have identified all your arrays, click Next, Finish, and then OK.
NetRAID Assistant saves the array configuration and prompts that the array configuration has
changed. Click OK.
Initialize the Array
After you have defined the cluster's arrays, you need to initialize the arrays you defined. HP NetRAID Assistant
initializes all arrays you have defined at the same time.
To initialize all the arrays:
1. At the Would you like to Initialize? prompt click OK.
HP NetRAID Initialization may be time consuming. Plan on 5 to 15 minutes per array.
2. When NetRAID initialization is complete, exit HP NetRAID Assistant.
3. Continue configuration using Windows NT Disk Administrator.
37