Download Print this page

HP LC2000r - NetServer - 128 MB RAM Configuration Manual: Appendix B - Updating Hp Netraid Firmware; What's Needed; Updating The Firmware

Hp netserver lxr pro netraid installation guide.
Hide thumbs

Advertisement

APPENDIX B - Updating HP NetRAID Firmware

What's Needed

The following items are needed to update the firmware:
HP NetRAID utilities disk labeled NR Firmware & Driver (see Appendix A) to upgrade the adapter
firmware on both systems.
Current version of MSDOS in bootable 3-1/2" floppy disk format

Updating the Firmware

To flash the NetRAID adapter firmware:
1.
Shut down the system (A or B) and boot to DOS.
2.
Insert the utility disk labeled NR Firmware & Driver, in the system's floppy drive and log on to the A
drive.
3.
At the A: prompt, run the firmware update program mflash.exe by typing: a:\mflash [Return]
4.
The mflash utility begins updating the firmware and provides feedback in the form of three animated
bars that gauge the utility's progress. When complete, click Yes.
5.
Repeat this procedure for the other system.
6.
Reboot the system when prompted.
31

Advertisement

   Related Manuals for HP LC2000r - NetServer - 128 MB RAM

Comments to this Manuals

Symbols: 0
Latest comments: