HP LC2000r - NetServer - 128 MB RAM Configuration Manual page 4

System software:
Navigator version
Operating System
Service pack
SPU
Model
Clock speed
No. of CPUs
BIOS version
CPU cache
RAM
No. of power supplies
Local storage
I/O slots:
Storage
Local
Physical drive location
Disk drives
Controller
SCSI bus
Shared
Controller
Model
No. of controllers
Firmware
Driver
NetRAID Assistant
SPU I/O slot
SCSI ID
Channels
RAID level
Logical disks
G.01.00 or later
Microsoft Windows NT Server 4.0, Enterprise Edition or later
SP3 and hotfix "clusfixi", or later
HP NetServer LXr Pro Model 1
200 MHz.
2 – 4 (at least 2 are required)
1.00.09CD0L or later
Any size
128 MB minimum. Must be HP.
3
Internal or external, using any controller. Must use HP disks. See
Storage below.
P4 – P6 Shared storage controller
P3 or P4 - NetRAID local storage
P2 – Intra-cluster (Heartbeat) LAN
P1 – Client LAN
All others - Any other plug-in cards.
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/8)
Must be HP
SPU embedded controller or any controller (any number, manufacturer or
driver) in any available I/O slot. Use P3 or P4 for NetRAID local storage.
See SPU I/O slots above.
Any HP cables that meet SCSI specifications and any SCSI bus speed
HP NetRAID Adapter D4943A
Use with HP Rack Storage/8 (D4902A) and HP Cluster Adapter only.
1 - 2
S.01.00
2.03
A.01.09
P4 - P6
6, 7
0 and 1 only
Do not use channel 2 for any purpose.
1, 5, 10, and 50 only
1 per RAID array
6 maximum per NetRAID adapter
2
Local