Added new technology
o
Expanded existing information
o
Added new firmware update procedures for unsupported processor stepping
o
375445-xx5 (June 2006)
The fifth edition of the HP ProLiant Servers Troubleshooting Guide, part number 375445-xx5, included the
following additions:
•
Added three new c-Class server blade flowcharts:
c-Class server blade power-on problems flowchart (on page 29)
o
c-Class server blade POST problems flowchart (on page 33)
o
c-Class server blade fault indications flowchart (on page 37)
o
•
Added new processor error codes:
Windows® Event Log processor error codes (on page 171)
o
Insight Diagnostics processor error codes (on page 172)
o
375445-xx4 (May 2006)
The fourth edition of the HP ProLiant Servers Troubleshooting Guide, part number 375445-xx4, included the
following additions:
•
Hot-plug SAS and SATA hard drive LED combinations (on page 21)
•
Operating system issues with Intel® dual-core processors (Hyper-Threading enabled) (on page 62)
•
Tape drive problems (on page 52)
•
New error messages in ADU error messages (on page 92) and POST error messages and beep codes
(on page 116)
375445-xx3 (September 2005)
The third edition of the HP ProLiant Servers Troubleshooting Guide, part number 375445-xx3, included the
following changes:
•
Updated SCSI hard drive guidelines
•
Added hot-plug SCSI hard drive LED combinations (on page 21)
•
Updated diagnostic flowcharts (on page 23)
•
Added operating system problems (on page 61)
•
Added Port 85 codes and iLO messages (on page 167)
•
Added new error messages to ADU error messages and POST error messages and beep codes
•
Updated contacting HP:
Contacting HP technical support or an authorized reseller
o
Server information you need
o
Introduction 11