HP ProLiant BL280c - G6 Server Datasheet page 384

Table 16-2
Class: SMX_ManagementProcessor
Property name
OperationalStatus
StatusDescriptions
Property implementation
Enumerators indicating the Management Processor
operational status (refer to OperationalStatus mapping
table in HP Management Processor (MP) Lite Profile for
specific descriptions of when each value is populated).
•
OperationalStatus[0] contains MP operational
status:
○
0 (Unknown), when NICCondition=0
○
2 (OK), normal operation
○ 3 (Degraded), when NICCondition=5
○
6 (Error), when NICCondition=6 or MP
software interface fails
•
OperationalStatus[1] contains NIC status (when MP
is enabled):
○ 0 (Unknown), when NICCondition=0 or MP
software interface fails
○
2 (OK), normal operation
○
3 (Degraded), when NICCondition=5
○ 6 (Error), when NICCondition=6
○
10 (Stopped), when NICCondition=3
○
15 (Dormant), when NICCondition=4
Note: When a Management Processor is disabled
(refer to property EnabledState) OperationalStatus[0]
will always report a status of 2 (OK) so as not to
contribute negatively to overall system status. An MP is
disabled only if the user has manually disabled it
through the MP's RBSU settings; this is seen as a
"normal" condition. In this scenario
OperationalStaus[1] is not populated.
Descriptive text per OperationalStatus.
•
StatusDescriptions[0] text per OperationalStatus[0]:
○ Management Processor Status: Unknown
○ Management Processor Status: OK
○
Management Processor Status: Degraded
○ Management Processor Status: Error
•
StatusDescriptions[1] text per OperationalStatus[1]:
○ Management Processor NIC Status: Unknown
○
Management Processor NIC Status: OK
○
Management Processor NIC Status: NIC is
disabled
○ Management Processor NIC Status: Not in use,
MP is utilizing host NIC
○
Management Processor NIC Status: NIC
disconnected
○ Management Processor NIC Status: NIC failed
Management Processor Lite 384