HP ProLiant BL495c - G5 Server Installation Instructions
Hp proliant bl495c server blade installation instructions
Hide thumbs
Also See for ProLiant BL495c - G5 Server:
- Datasheet (397 pages) ,
- Troubleshooting manual (106 pages) ,
- Integration notes (26 pages)
Advertisement
Quick Links
Download this manual
See also:
Troubleshooting Manual
HP ProLiant BL495c Server
Blade
Installation Instructions
© Copyright 2008, 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Part Number 466196-003
April 2009 (Third Edition)
Overview
Installation of a server blade requires the following steps:
1.
Install and configure an HP BladeSystem c-Class enclosure.
2.
Install any server blade options.
3.
Install interconnect modules in the enclosure.
4.
Connect the interconnect modules to the network.
5.
Install a server blade.
6.
Complete the server blade configuration.
For definitions of the acronyms used in this document, refer to
"Acronyms and abbreviations" in the server blade user guide.
Installing an HP BladeSystem c-
Class enclosure
Before performing any server blade-specific procedures, install an
HP BladeSystem c-Class enclosure.
The most current documentation for server blades and other
HP BladeSystem components is available at the HP website
(http://www.hp.com/go/bladesystem/documentation).
Documentation is also available in the following locations:
Documentation CD that ships with the enclosure
•
HP Business Support Center website
•
(http://www.hp.com/support)
•
HP Technical Documentation website (http://docs.hp.com)
Installing server blade options
Before installing and initializing the server blade, install any server
blade options, such as an additional processor, hard drive, or
mezzanine card. For server blade options installation information,
see the HP ProLiant BL495c Server Blade User Guide on the HP
website (http://www.hp.com/go/bladesystem/documentation).
Installing interconnect modules
For specific steps to install interconnect modules, see the
documentation that ships with the interconnect module.
Advertisement
Related Manuals for HP ProLiant BL495c - G5 Server
Summary of Contents for HP ProLiant BL495c - G5 Server
-
Page 1: Installation Instructions
For specific steps to install interconnect modules, see the documentation that ships with the interconnect module. © Copyright 2008, 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. -
Page 2: Connecting To The Network
Interconnect bay numbering and device mapping • HP BladeSystem c7000 Enclosure Server blade Interconnect Interconnect Notes signal bay number bay label Flex-10 NIC 1, — 2 (embedded) To support network connections for specific signals, install an Mezzanine 1 Four port cards interconnect module in the bay corresponding to the embedded connect to bay 2 NIC or mezzanine signals. -
Page 3: Completing The Configuration
Remove the device bay blank. Install the server blade. Remove the enclosure connector cover. Completing the configuration To complete the server blade and HP BladeSystem configuration, see the overview card that ships with the enclosure. Prepare the server blade for installation.