Installing The Storage Device Into A Rittal-Style Rack; Figure 30 Rittal-Style Rail Kit Contents - HP StorageWorks 2405 - Disk System User Manual

Installing the Storage Device into a Rittal-Style Rack

56 Installation
Your storage device can be installed into the Rittal-Style Rack by doing the
following steps:
1 Inspect the contents of the rail kit. If any parts are missing, call your nearest
HP sales office (see Figure 30).
2 Align the front of rails to the inside of the front cabinet column.
Carefully observe the alignment of the groups of holes on the columns so the
holes in the rails align properly (see Figure 31).