Viewing The Stm Information Log - HP StorageWorks 2405 - Disk System User Manual

Viewing the STM Information Log

Status values are OK, critical error, noncritical, not installed, unknown, and
status not available. See Interpreting Status Values on page 100 for the meanings
of these terms.
STM generates Information and Activity logs for a selected disk system. Execute
STM in an X window and run the Information tool as follows.
1 At the system prompt, type xstm&.
2 Select the desired disk system (HP A6250A).
3 Select Information from the Tools menu.
4 To generate a current log, select Run.
5 To view log output, select Information from the Tools menu.
6 Select Information Log.
7 Select Done when you have finished viewing the information.
The contents of the STM Information Log are as follows:
Log creation time
Hardware path
Product ID
FC Loop ID
LCC A Status
LCC B Status
Reporting LCC
The date and time the Information Tool was last
run for the selected disk system.
The physical path from the host to the reporting
LCC; for example, 8/12.8.0.255.2.14.0.
A6250A, the HP product number of the disk
system.
The FC-AL ID of the reporting LCC, a decimal
value between 0 and 125.
The reported status of LCC A in the selected disk
system. Possible values are OK, critical,
noncritical, not installed, or not available.
The reported status of LCC B in the selected disk
system. Possible values are OK, critical,
noncritical, not installed, or not available.
LCC A or LCC B, whichever LCC corresponds to
the selected hardware path.
Troubleshooting 99