Figure 4
Installing the LAN hub into a system/e rack
Front of rack enclosure
Connect the AC power cable to the LAN hub and to the rack enclosure AC power outlet. Do not
3.
turn the LAN hub on at this time.
4.
Attach the 10-BaseT cables to the LAN hub for each library. See
Hub" on page 31 for connecting instructions.
5.
Attach a network cable to the LAN hub. See the section on
page 31 for instructions.
1
"Cabling the PTM and LAN
MSL6000 series pass-through mechanism reference guide
"Cabling the PTM and LAN
Hub" on
15