HP StorageWorks P9000 Software Installation Manual page 33

NOTE: The following commands are available to use even if both of the access permissions are
not assigned to a user:
YKCONMSG
YKDROP
YKENV
YKERCODE
YKEXPORT
YKIMPORT
YKINSCHK
YKLOAD
YKSLEEP
YKSTORE
YKWTOMSG
NOTE: Use profiles to restrict access to the commands listed below. Unrestricted access to these
commands could have an adverse effect on recovery operations at a remote site.
YKBLDCMD
YKBLDPTH
YKDELCMD
YKDELETE
YKDELPTH
YKFREEZE
YKMAKE
YKRECVER
YKRESYNC
YKRUN
YKSUSPND
For details about how to activate the RACF FACILITY class, how to define a profile, and how to
assign access permissions for profiles to user accounts, see the Security Server RACF Security
Administrator's Guide.
To assign a user permission to use all of the CLI commands:
1. Activate the RACF FACILITY class.
SETROPTS CLASSACT(FACILITY)
2. Define the STGADMIN.YKA.BCM.COMMANDS profile for the FACILITY class.
REDEFINE FACILITY STGADMIN.YKA.BCM.COMMANDS UACC(NONE)
3. Add access permissions for the defined profile to the user account.
PERMIT STGADMIN.YKA.BCM.COMMANDS CLASS(FACILITY) ID(user-ID) ACCESS(READ)
To assign a user permission to use only the BC Z Manager query commands:
1. Activate the RACF FACILITY class.
SETROPTS CLASSACT(FACILITY)
2. Define the STGADMIN.YKA.BCM.YKQUERY profile for the FACILITY class.
Installing Business Continuity Manager 33