Ykdspenv Command Syntax - HP StorageWorks P9000 Software Installation Manual

Table 15 YKSETENV Command Return Codes List (continued)
Return Code
12
16
NOTE: For parameters, you can specify multiple items within the allowable length for PARM. If
more than one of the same parameter is specified, the latter one will take effect.

YKDSPENV Command Syntax

Format
START YKDSPENV,
[PARM='[SUMMARY|DETAIL]']
Function
Displays the program product name and the BC Z Manager environment variables on the OS
console.
Parameters
SUMMARY
Displays the program product name and values of the BC Z Manager environment
variables.
DETAIL
Displays the program product name, values of the BC Z Manager environment
variables, values set by using the YKSETENV command, and values set by using
system symbols.
Return Codes
Table 16 YKDSPENV Command Return Codes List
Return Code
0
4
In the following example, the YKDSPENV command is executed. The version portion in this example
varies depending on the version.
Execution Example 1
START YKDSPENV
YKT403I HP StorageWorks P9000 for Business Continuity Manager Software
YKT400I BC Z Manager environment variables version
YKT401I Host ID: 00
YKT401I License info DSN prefix: HP
YKT401I BCM log output method: LOGR
YKT401I CLI log output settings: YES
Execution Example 2
START YKDSPENV,PARM='DETAIL'
YKT403I HP StorageWorks P9000 for Business Continuity Manager Software
YKT400I BC Z Manager environment variables version
YKT401I Host ID: 01
YKT401I License info DSN prefix: HP.BCM
YKT401I BCM log output method: SAM
YKT401I CLI log output settings: NO
30 Installing Business Continuity Manager
Meaning
Processing was cancelled due to a system error (such as a GETMAIN error).
An internal error occurred.
Meaning
Successful completion.
There is an error in the specified value. The command is executed assuming SUMMARY
is input.