[Install] Set Fibre Topology; [Install] Set Host Mode - HP StorageWorks P9000 Reference Manual

Detailed information
Item
Port
Fibre Addr.
Num. of Ports

[Install] Set Fibre Topology

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Fibre Topology,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,Fabric,Connection}
=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},
{XX,Enable,P-to-P},{XX,Disable,P-to-P}],Num. of Ports=4
Detailed information
Item
Port
Fabric
Connection
Num. of Ports

[Install] Set Host Mode

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,SVP,uid=user-name,1,,
[Install],Set Host Mode,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Port,HostGrpID,Mode,Option[0:31],Option[32:63],Option[64:95]}
=[{XX,0xXXX,0x00,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX},
{XX,0xXXX,0x4F,0xXXXXXXXX,0xXXXXXXXX,0xXXXXXXXX}],
Num. of Host Groups=2
Detailed information
Item
Port
HostGrpID
Mode
88 Audit log examples
Description
The name of the port that the fibre address has been set.
The address of the Fibre Channel port after the setting is made.
The information outside of the parentheses indicates AL-PA (arbitrated-loop physical address).
The information inside the parentheses indicates the loop ID.
The number of ports where address has been set.
Description
The name of the port where the topology of Fibre Channel is set.
Indicates whether the Fabric switch is enabled or disabled.
Enable: Enabled, Disable: Disabled
The connecting mode of the Fabric switch selected.
FC-AL: FC-AL is selected, P-to-P: P-to-P is selected
The number of ports where the topology of Fibre Channel is set.
Description
The name of the port to which the host group belongs.
The host group number.
The host mode set. Please see the HP StorageWorks P9000 Provisioning for Open Systems User
Guide for the meaning of the host mode number.