Screen Command Table; Lamp Command Table; Sound Command Table; Setting Command Table - Sanyo PLC-WL2503 - 2500 Lumens Manual

PLC-WL2500 / WL2501/ WL2503 Expand Serial Command Functional Specifications

5.4 Screen Command Table

Execute command
CF_SCREEN_%1[CR]
CF_DZCENT_%1[CR]
CF_KEYSTONE_%1[CR]
CF_KYSTNMODE_%1[CR]
CF_VSCALE_%1[CR]
CF_VPOS_%1[CR]
CF_HSCALE_%1[CR]
CF_HPOS_%1[CR]

5.5 Lamp Command Table

Execute command
CF_LAMPH_%1[CR]
CF_LAMPMODE_%1[CR]

5.6 Sound Command Table

Execute command
CF_VOLUME_%1[CR]
CF_MUTE_%1[CR]

5.7 Setting Command Table

Execute command
CF_LANG_%1[CR]
CF_MENUPOSITION_%1[CR]
CF_AUTOSETUPPCADJ_%1 [CR]
CF_INPUTSEARCH_%1[CR]
CF_AUTOSETUP_%1[CR]
CF_BACKGND_%1[CR]
CF_DISP_%1[CR]
CF_LOGO_%1_%2[CR]
CF_CEIL_%1[CR]
CF_REAR_%1[CR]
CF_SCREENASPECT_%1[CR]
CF_HDMISETUP_%1[CR]
CF_HDMISOUND_%1[CR]
CF_TERMINAL_%1[CR]
CF_STANDBYMODE_%1[CR]
CF_P-MANE_%1[CR]
CF_P-MANETIME_%1[CR]
CF_ON-STA_%1[CR]
CF_PTIMEMODE_%1[CR]
CF_PTIMER_%1[CR]
CF_PTIME_%1[CR]
CF_CCAPTIONDISP_%1[CR]
CF_CCAPTIONCOLOR_%1[CR]
CF_RCODE_%1[CR]
CF_KEYDIS_%1[CR]
CF_PJPINCODE_%1[CR]
CF_FANMODE_%1[CR]
CF_FANCONTROL_%1[CR]
CF_DELAYCTRL_%1[CR]
CF_FILTIMER_%1[CR]
CF_FILH_%1[CR]
CF_FDEFAULT_%1[CR]
Item
Select Screen size
Cancel Digital Zoom mode
Set Keystone
Set Keystone Store mode
Set value of Vertical scale
Set value of Vertical position
Set value of Horizontal scale
Set value of Horizontal position
Reset Lamp use time
Select Lamp mode
Set Volume value
Control ON/OFF of Sound Mute
Select language for OSD
Move menu position.
Set Auto PC in Auto Setup
Set Input search function
Execute Auto Setup
Set screen mode for the case of no signal
Set Display function
Set Logo function
Set Ceiling function
Set Rear function
Set Screen aspect function
Set Image mode of HDMI menu.
Set Sound mode of HDMI menu.
Select mode of Terminal menu
Set Standby Mode
Set Power management function
Set Power management time
Set Direct on function
Select P-timer mode
Execute P-timer
Set Countdown timer for P-timer
Set channel of Closed caption
Set color of Closed caption
Select Remote Control Reception Code
Disable RC/Projector keys
(Only available to models with top panel button)
Input PIN code to release PJ Lock
Select Fan mode
Select Fan control mode
Set Video delay control
Set time when Filter warning OSD is displayed
Reset Filter used time
Set the value to Factory Default
10/72
Item
Item
Item