Network Setup; Usb Menu - Lexmark E360d Series User Manual

Menu item
Network Buffer
Auto
Disabled
Mac Binary PS
Auto
On
Off

Network Setup

Reports Menu
Network Card Menu
TCIP Menu
IPv6 Menu
Wireless Menu
AppleTalk Menu

USB menu

Menu item
PCL SmartSwitch
On
Off
PS SmartSwitch
On
Off
Description
Sets the size of the network input buffer
Notes:
•
Auto is the factory default setting.
•
To increase the maximum size range for the Network Buffer, disable the USB
buffer.
•
Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
•
Auto is the factory default setting.
•
The Off setting filters print jobs using the standard protocol.
•
The On setting processes raw binary PostScript print jobs.
Lists all the network setup menus, regardless of the active network of the printer
Note: Certain options are not available on selected printer models.
Description
Sets the printer to automatically switch to PCL emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
•
On is the factory default setting.
•
When the Off setting is used, the printer does not examine incoming data.
•
When the Off setting is used, the printer uses PostScript emulation if the PS
Smartswitch setting is On. It uses the default printer language specified in the
Setup menu if the PS SmartSwitch setting is Off.
Sets the printer to automatically switch to PS emulation when a print job received
through a USB port requires it, regardless of the default printer language
Notes:
•
On is the factory default setting.
•
When the Off setting is used, the printer does not examine incoming data.
•
When the Off setting is used, the printer uses PCL emulation if the PCL
Smartswitch setting is On. It uses the default printer language specified in the
Setup menu if the PCL SmartSwitch setting is Off.
Understanding printer menus
67