Table of Contents
Advertisement
7.
Close the operator panel cover.
8.
Press Start/Stop to set the printer online.
Printing a network setup page
If the printer is attached to a network, print a network setup page to verify the network connection and find the
printer address.
Note: This function is disabled if a USB cable is connected.
1.
Make sure the printer is on and the paper is loaded.
2.
With a paper clip or the tip of a pen, press the recessed button located just above the Network connection.
3.
Check the first section on the network setup page, and confirm that the status is Connected. If the status
is Not Connected, the LAN drop may not be active, or the network cable may be malfunctioning. See
Networking service check.
4.
Check the network setup page to find the IP Address and the Fully Qualified Domain Name. The Fully
Qualified Domain Name is useful in situations where the Address changes. For instance, the Address
changes if the printer is moved; however, the Fully Qualified Domain Name does not change.
Note: The network setup page also provides important network configuration information.
2580+, 2581+, 2590+, 2591+
3-11
Diagnostic aids
Previous
Next
Go Back
Advertisement
Table of Contents
