Custom Types Menu; Universal Setup Menu - Lexmark E360d Series User Manual

Custom Types menu

Menu item
Custom Type <x>
Paper
Card Stock
Transparency
Rough/Cotton
Labels
Envelope
Recycled
Paper
Card Stock
Transparency
Rough/Cotton
Labels
Envelope

Universal Setup menu

These menu items are used to specify the height, width, and feed direction of the Universal Paper Size. The Universal
Paper Size is a user-defined paper size. It is listed with the other paper size settings and includes similar options, such
as support for duplex printing and printing multiple pages on one sheet.
Menu item
Units of Measure
Inches
Millimeters
Portrait Width
3–14.17 inches
76–360 mm
Description
Associates a paper or specialty media type with a factory default Custom
Type <x> name or a user-defined Custom Name created from the
Embedded Web Server or MarkVision
Notes:
•
Paper is the factory default setting.
•
The custom media type must be supported by the selected tray or
multipurpose feeder in order to print from that source.
Specifies a paper type when the Recycled setting is selected in other menus
Notes:
•
Paper is the factory default setting.
•
The custom media type must be supported by the selected tray or
multipurpose feeder in order to print from that source.
Description
Identifies the units of measure
Notes:
•
Inches is the US factory default setting.
•
Millimeters is the international factory default setting.
Sets the portrait width
Notes:
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
•
8.5 inches is the US factory default setting. Inches can be increased
in 0.01-inch increments.
•
216 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.
Understanding printer menus
64
TM
Professional