Lexmark E360d Series User Manual page 68

Menu item
NPA Mode
Off
Auto
USB Buffer
Disabled
Auto
Mac Binary PS
On
Off
Auto
ENA Address
<xxx>.<xxx>.<xxx>.<xxx>
ENA Netmask
<xxx>.<xxx>.<xxx>.<xxx>
ENA Gateway
<xxx>.<xxx>.<xxx>.<xxx>
Description
Sets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
•
Auto is the factory default setting.
•
Changing this setting causes the printer to restart.
Sets the size of the USB input buffer
Notes:
•
Auto is the factory default setting.
•
The Disabled setting turns off job buffering. Any jobs already buffered are
printed before normal processing is resumed.
•
The maximum size allowed depends on the amount of memory in the printer,
the size of the other link buffers, and whether the Resource Save setting is On
or Off
•
Changing this setting causes the printer to restart.
Sets the printer to process Macintosh binary PostScript print jobs
Notes:
•
Auto is the factory default setting.
•
The Off setting filters print jobs using the standard protocol.
•
The On setting processes raw binary PostScript print jobs.
Sets the network address information for an external print server that is attached to
the printer using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Sets the netmask information for an external print server that is attached to the
printer using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Sets the gateway information for an external print server that is attached to the
printer using a USB cable
Note: This menu item is available only if the printer is attached to an external print
server through the USB port.
Understanding printer menus
68