Reports Menu; Network Setup Page - Lexmark E360d Series User Manual

Menu item
Portrait Height
3–14.17 inches
76–360 mm
Feed Direction
Short Edge
Long Edge

Reports menu

Reports menu
Menu item
Menu Settings Page
Device Statistics

Network Setup Page

Print Fonts
PCL Fonts
PostScript Fonts
Description
Sets the portrait height
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
•
14 inches is the US factory default setting. Inches can be increased in
0.01-inch increments.
•
356 mm is the international factory default setting. Millimeters can
be increased in 1-mm increments.
Specifies the feed direction
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only if the longest edge is shorter than the
maximum length supported in the tray.
Description
Prints a report containing information about paper loaded into trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, and the status of the
network connection
Prints a report containing printer statistics such as supply information and
details about printed pages
Prints a report containing information about the network printer settings, such
as the TCP/IP address information
Notes:
•
This menu item appears as Network <x> Setup Page when there is more
than one network option installed.
•
This menu item is available only on network printers or printers connected
to print servers.
Prints a report in English of all the fonts available for the printer language
currently set in the printer
Note: A separate list is available for PCL and PostScript emulations. Each
emulation report contains print samples and information about the available
fonts for each language.
Understanding printer menus
65