Verifying Printer Setup; Setting Up The Printer Software - Lexmark E360d Series User Manual

Verifying printer setup

Printing a menu settings page
Print a menu settings page to review the current menu settings and to verify if the printer options are installed
correctly.
Note: If you have not made any menu item settings changes yet, then the menu settings page lists all the factory
default settings. Once you select and save other settings from the menus, they replace the factory default settings
as user default settings. A user default setting remains in effect until you access the menu again, choose another value,
and save it.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until Reports appears, and then press
4
Press the arrow buttons until Menu Settings Page appears, and then press
After the menu settings page prints, Ready appears.
Printing a network setup page
If the printer is attached to a network, print a network setup page to verify the network connection. This page also
provides important information that aids network printing configuration.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the arrow buttons until Reports appears, and then press
4
Press the arrow buttons until Network Setup Page appears, and then press
After the network setup page prints, Ready appears.
5
Check the first section on the network setup page, and confirm that Status is "Connected."
If Status is "Not Connected," the LAN drop may not be active, or the network cable may be malfunctioning. Consult
a system support person for a solution, and then print another network setup page.

Setting up the printer software

Installing printer software
A printer driver is software that lets the computer communicate with the printer. The printer software is typically
installed during the initial printer setup.
For Windows users
1
Close all open software programs.
2
Insert the Software and Documentation CD.
.
.
Additional printer setup
23
.
.
.
.