Table of Contents
Advertisement
S
S
UPER
ERVER 1012G-MTF User's Manual
1-2
Motherboard Features
At the heart of the SuperServer 1012G-MTF lies the H8SGL-F, a single processor
motherboard based on the AMD SR5650 and SP5100 Southbridge chipsets. This
chipset functions as a Media and Communications Processor (MCP). Controllers
for the system memory are integrated directly into AMD Opteron processors. Below
are the main features of the H8SGL-F. See Figure 1-1 for a block diagram of the
chipset.
Processors
The H8SGL-F supports a single AMD Opteron 6100 series processor in a Socket
G34 type socket. Please refer to the motherboard description pages on our web site
for a complete listing of supported processors (www.supermicro.com).
Memory
The H8SGL-F has eight DIMM slots that can support up to 128 GB of DDR3-
1333/1066/800 registered ECC SDRAM or 32 GB of DDR3-1333/1066/800 MHz
unbuffered ECC/non-ECC SDRAM memory. Memory modules of the same size and
speed should be used. See Chapter 5 for details.
Serial ATA
A SATA controller is integrated into the chipset to provide a six-port, 3 Gb/s Serial
ATA subsystem, which is RAID 0, 1 and 10 capable. The SATA drives are hot-
swappable units.
PCI Expansion Slots
The H8SGL-F has one PCI-Express 2.0 x8 (in x16 slot) slot, one PCI-Express 2.0 x8
slot, one PCI-Express 2.0 x4 (in a x8 slot) and three 32-bit PCI 33 MHz slot. A PCI-
Express 2.0 x16 riser card (CSE-RR1U-E16) is provided for use with this system.
I/O Ports
The color-coded I/O ports include two COM Ports (one external serial port, one Fast
UART 16550 port), Eight USB (Universal Serial Bus 2.0) ports (2x rear, 4x header,
2x type A), VGA port, PS/2 mouse and keyboard ports and two 1-Gb Ethernet ports.
A dedicated IPMI LAN port is also included on the H8SGL-F.
1-2
Advertisement
Table of Contents
