S
S
UPER
ERVER 1012G-MTF User's Manual
Unpacking
The motherboard is shipped in antistatic packaging to avoid static damage. When
unpacking the board, make sure the person handling it is static protected.
Dedicated IPMI Port
Mouse Port
Keyboard Port
USB
Ports
6-2
Control Panel
The control panel (located on the front of the chassis) must be connected to the
JF1 connector on the motherboard to provide you with system control buttons and
status indicators. These wires have been bundled together in a ribbon cable to
simplify the connection.
The LEDs inform you of system status. See Chapter 3 for details on the LEDs and
the control panel buttons. Details on JF1 can be found in Chapter 5.
Figure 6-1. Chassis Front View
USB
Ports
SAS/SATA Drives (4)
Figure 6-2. Chassis Rear View
COM1
VGA
Port
Port
6-2
COM2
Control
Port
PCI Expansion Slot
Ethernet
Ports
Panel