Lexmark W810n - Optra B/W Laser Printer Reference page 31

Printer messages (continued)
Message
56 Serial
x
Port Disabled
56 Std Parallel
Port Disabled
56 Parallel
x
Port Disabled
58 Too Many
Disks Installed
61 Defective
Disk
62 Disk Full
63 Unformatted
Disk
Action
Data has been sent to the printer through a serial
port, but the serial port is disabled.
Press to clear the message. The printer discards
Go
any data received through the serial port.
To avoid another 56 Serial Port x Disabled
message, make sure the Serial Buffer menu item in
the Serial Menu is not set to Disabled.
Data has been sent to the printer through a parallel
port, but the parallel port is disabled.
Press to clear the message. The printer discards
Go
any data received through the parallel port.
To avoid another error message, make sure the
Parallel Buffer menu item in the Parallel Menu is not
set to Disabled.
The printer only supports one disk option at a time.
To clear the message turn the printer off and unplug
the printer. Remove one of the disk options from the
printer.
See page 196 for information on removing disks.
The printer detects a defective disk option.
Press to clear the message and continue
Go
printing. You must install a different disk option
before you can perform any operations that require a
hard disk.
See page 196 for information on removing a disk.
There is not enough memory on the disk option to
store the data sent to the printer.
Press to clear the message and continue
Go
processing. Any information not previously stored on
the disk option is deleted.
The printer detects an unformatted disk option.
Press to clear the message and continue
Go
printing.
You must format the disk before you can perform any
disk operations. To format the disk, select Format
Disk from the Utilities Menu.
If the error message remains, the disk option may be
defective and require replacing. Disk operations are
not allowed until the defective disk is replaced and
the new one is formatted.
17
error