Lexmark W810n - Optra B/W Laser Printer Reference page 23

Printer messages (continued)
Message
Replace Fuser
Replace PC Kit
Replace PC Kit
To Continue
Replace Toner
Replace Toner
Cartridge
Action
Replace the fuser to maintain top performance and
avoid print quality and paper feeding problems.
To clear the message:
• Replace the fuser and reset the printer's internal
counter for the fuser. See page 140 for detailed
instructions on replacing the fuser.
• If necessary, press
delay replacing the fuser, you may experience
printing problems related to a fuser operating
beyond its intended life.
The photoconductor cartridge must be replaced.
When replacing the photoconductor, also replace
the paper dust remover shipped as part of the photo-
conductor kit.
To clear this message:
• Replace the photoconductor cartridge and paper
dust remover. See page 116 for detailed
instructions on replacing these items.
• If necessary, press
replacing the photoconductor cartridge.
Note: If you do not replace the photoconductor
cartridge now, the printer will soon display the
Replace PC Kit To Continue
operating. You will not be able to print until you
replace the photoconductor cartridge.
The printer has ceased operating. You cannot print
until you replace the items in the photoconductor kit.
See "Installing the photoconductor kit" on page 116
for more information.
The toner cartridge is empty.
To clear the message:
• Replace the toner cartridge. See "Installing a
toner cartridge" on page 111 for detailed
instructions.
• If Replace Toner Cartridge
display, press Go to continue printing without
replacing the toner cartridge.
Note: If you do not replace the toner cartridge now,
the printer will soon display the
message and stop operating. You will not
Continue
be able to print until you replace the toner cartridge.
9
to continue printing. If you
Go
to continue printing without
Go
message and stop
appears on the
Replace Toner To