Lexmark W810n - Optra B/W Laser Printer Reference page 28

Printer messages (continued)
Message
37 Insufficient
Memory
Held Jobs may be
lost. Go/Stop?
38 Memory Full
Action
The printer memory is too full to continue processing
print jobs.
The messages
37 Insufficient Memory
Jobs may be lost. Go/Stop?
until you do one of the following:
• Press Go to clear the messages and continue
printing the job. The printer frees memory by
deleting the oldest held job and continues
deleting held jobs until there is enough printer
memory to process the job.
• Press to clear the messages without
Stop
deleting any held jobs. Some data in the current
job may not print or may not print correctly.
• Cancel the current job. Press
The Job Menu is displayed. Press
until
<Menu Cancel Job
line of the operator panel display. Press
The printer is processing data, but the memory used
to store pages is full.
• Press Go to clear the message and continue
printing the job. Some data may not print or may
not print correctly.
• Cancel the current job. Press
The Job Menu is displayed. Press
until
<Menu Cancel Job
line of the operator panel display. Press
To simplify the print job:
• Reduce the amount of text or graphics on a page.
• Delete unnecessary downloaded fonts or macros.
Install additional printer memory to avoid future
errors.
38 Memory Full
14
and
Held
alternate on the display
or
Menu> <Menu
or
Menu>
appears on the second
Select
or
Menu> <Menu
or
Menu>
appears on the second
Select
.
.
.
.