Lexmark W810n - Optra B/W Laser Printer Reference page 16

Printer messages (continued)
Message
Cancelling Job
x
Change Tray
Check Finisher
Installation
Check Mailbox
Installation
Clearing Job
Accounting Stat
x
Close Cover
x
Close Door
Action
The printer is processing a request to cancel the
current print job.
The printer is requesting a different media than what
is loaded in the tray or set in the Paper Size or Paper
Type menus.
Check the second line of the display for the custom
media name defined using the MarkVision utility, the
media size, or the media type and size the printer is
looking for (
Plain Letter
To clear the message:
• Load the requested type and size media in the
tray specified on the display. The printer automat-
ically clears the message and continues printing
the job.
For more information, see "Loading paper" on
page 79.
• Press to clear the message and continue
Select
printing on the media currently loaded in the tray.
• Cancel the current job. Press
The Job Menu is displayed. Press
until
<Menu Cancel Job
line of the operator panel display. Press
The specified option is detached from the printer. To
clear this message, push the option flush against the
printer and make sure the set pin and magnetic
bracket are properly attached. For more information,
refer to the Setup Guide .
The printer is deleting all job statistics stored on the
hard disk option.
The specified cover is open. Close the cover to clear
the message.
Use the message maps on top of the printer to
locate the cover. See page 43 for an illustration.
Note: If
Close Cover H
the transport unit cover is closed, make sure the
cable connecting the finisher or mailbox option to the
transport unit is securely attached.
The specified door is open. Close the door to clear
the message.
Use the message maps on top of the printer to
locate the door. See page 43 for an illustration.
2
, for example).
Menu> or <Menu
Menu>
appears on the second
Select
appears on the display and
.
or
.