Lexmark W810n - Optra B/W Laser Printer Reference page 21

Printer messages (continued)
Message
Performing
Self Test
Power Saver
Priming Failed,
Retry. Go/Stop?
Priming Stapler
Print Jobs on
Disk. Go/Stop?
Printing
Directory List
Printing Font
List
Action
The printer is running the normal series of start-up
tests it performs after it is turned on.
The printer is reducing its electricity consumption
while it is idle. When your printer is inactive for the
period of time specified in the Power Saver menu
item (20 minutes is the factory default), the
message replaces the
Saver
display.
Your printer is ready to receive and process data.
When is displayed, you can:
Power Saver
• Press to quickly warm the printer to normal
Go
operating temperature and display the
message.
• Press or
Menu> <Menu
The printer failed to prepare the stapler to staple
print jobs.
• Press to attempt priming the stapler again.
Go
• Make sure the stapler has staples installed and
there is no sign of a staple jam.
• Make sure there is paper in the tray specified in
the Staple Prime Source menu.
• If you are printing a job, press
continue the print job without priming the stapler.
See "Priming the stapler" on page 162 for more
information.
The printer is preparing the stapler to staple print
jobs. After the printer feeds a sheet of paper from
the tray specified in the Staple Prime Source menu,
the stapler attempts to staple the page until it is
successful. The stapled page is then output to bin 2.
See "Priming the stapler" on page 162 for more
information.
Jobs that were spooled to the optional disk before
the printer was last turned off have not yet printed.
• Press Go to print the jobs.
• Press or
Return Stop
disk without printing them.
The printer is processing or printing a directory of all
files stored on the flash memory option and the hard
disk option.
The printer is processing or printing a list of all
available fonts for the selected printer language.
7
Power
message on the
Ready
Ready
to open the menus.
or
Return Stop
to delete the jobs from the
to