Lexmark W810n - Optra B/W Laser Printer Reference page 19

Printer messages (continued)
Message
Load Manual
Load Staples
Action
You have sent a request for a manual feed job to the
printer, and the printer is ready for you to insert a
single sheet into the manual feed tray. (A manual
feed tray is available on your printer only if a duplex
unit is installed.)
Check the second line of the display for the custom
media name defined using the MarkVision utility, the
media size, or the media type and size the printer is
looking for (
Plain Letter
To clear the message:
• Load media of the requested type and size in the
manual feed tray, with the print side face down.
– For A4, A5, B5, executive, and letter size
paper, feed the long edge of the paper first.
– For A3, B4, legal, and 11x17 size paper, feed
the short edge of the paper first.
• Press or
Select Go
request and print on media already installed in
one of the paper sources. If the printer finds a tray
that has media of the correct type and size, it
feeds media from that tray. If the printer cannot
find a tray with the correct media type and size, it
prints on whatever media is installed in the default
paper source.
• Cancel the print job. Press
Job Menu is displayed. Press
until Cancel Job appears on the second line.
.
Press Select
The printer is trying to staple the print job, but the
stapler is empty. To clear this message:
• Install a new staple cartridge in the stapler. See
page 148 for detailed instructions.
• Press to clear the message and continue
Go
printing without stapling.
• Cancel the print job. Press
Job Menu is displayed. Press
until Cancel Job appears on the second line.
Press .
Select
5
, for example).
to ignore the manual feed
Menu> or <Menu
or
Menu> <Menu
or
Menu> <Menu
or
Menu> <Menu
. The
. The