Lexmark W810n - Optra B/W Laser Printer Reference page 18

Printer messages (continued)
Message
Flushing Buffer
Formatting Disk
Formatting Flash
DO NOT POWER OFF
Infrared x
Insert PC
Cartridge
Insert Stapler
x
Insert Tray
Invalid
x
Network Code
Action
The printer is flushing corrupted print data and
discarding the current print job.
The printer is formatting the hard disk option.
Note: Do not turn the printer off while this message
is displayed.
The printer is formatting the flash memory option.
Note: Do not turn the printer off while this message
is displayed.
An optional infrared interface is the active communi-
cation link.
The photoconductor cartridge is either not installed
or is installed incorrectly. Correctly install the photo-
conductor cartridge to clear the message.
For installation instructions, see page 116.
The stapler either is not installed or is installed
incorrectly.
• Correctly install the stapler to clear the message.
For installation instructions, see step 12 on
page 153.
• Press to ignore the message.
Go
If you choose to ignore the message, the printer
handles the job as if the stapler were installed but
out of staples. If the
appears, press
Go
and print the job without stapling it.
Insert the specified tray completely into the printer.
Note: If you cannot clear this message and the
specified tray is a 500-sheet paper tray (tray 2 or tray
3, or an optional tray 4), make sure the left paper
guide is properly inserted and snaps into the slot at
the front of the tray. For detailed instructions, see
step 5 on page 93.
The code in an internal print server (also called an
internal network adapter or INA) is not valid. The
printer cannot receive any jobs until valid code is
programmed into the internal print server.
You can download network code while this message
is displayed.
4
Load Staples message
again to ignore the message