HP Xw9400 - Workstation - 16 GB RAM Reference Manual page 45

Table 4-1 Computer Setup Utility menu descriptions (continued)
Heading
I/O**
ENWW
Option Description
APIC APIC
Interrupts
Allow manual configuration of system IRQs.
For more details on using this feature and on maximizing interrupt performance,
refer to the Optimizing APIC Interrupt Assignments on the xw9400 white paper
available at http://tclperf.fc.hp.com/performance_briefs/index.htm.
Onboard Disable or set IRQ, DMA, and I/O Range values for legacy devices.
Devices
PCI Devices Disable or select IRQ values for PCI devices.
Device NIC PXE Option ROM Download (Enable/Disable)
Options
Disable means you cannot boot from this device, but more option ROM space
is available for other devices.
Onboard SAS Option ROM Download (Enable/Disable)
Disable means you cannot boot from SAS drives, but more option ROM space
is available for other devices.
SATA Option ROM Download (Enable/Disable)
Enables or disables downloading embedded SATA option ROM. Disable
means you cannot boot from SATA devices, but more option ROM space is
available for other devices.
SATA RAID (Enable/Disable)
Enables or disables SATA drives for a RAID. If disabled, a single line is
displayed. If enabled, the menu expands to allow enabling/disabling each
SATA port.
Num Lock State at Power-On (Off/On)
Sets the keyboard
change this state, also.
S5 Wake on LAN (Enable/Disable)
Allows the network to wake the system from shutdown (ACPI S5). When set
to Disable, system power consumption is reduced to match Federal Energy
Management Program (FEMP) guidelines.
Unique Sleep State Blink Rates (Enable/Disable)
Assigns different LED blink patterns for S1 and S3. (The system LED is off for
S4 and S5.)
Monitor Tracking (Enable/Disable)
Enabling this option allows the ROM to save the monitor asset tracking
information such as the serial number and model.
Num Lock state after POST. The Operating System can
Computer Setup (F10) Utility 35