Processor; Removing The Processor - HP Xw9400 - Workstation - 16 GB RAM Reference Manual

Processor

Removing the processor

CAUTION:
are extremely fragile. Damaged sockets will require a board replacement.
Lift the processor out of the socket— do not slide the processor on the socket.
When installing a processor, align the dimples on the side of the processor with the notches in the socket.
1. Disconnect power from the system
panel (Access panel on page
on page
2. Raise the processor socket handle fully (1) and lift the socket cover (2).
Figure 5-74
ENWW
Use extreme care when installing or removing a processor. The exposed socket pins
63) and the CPU heatsink
113).
Raising the processor socket handle
(Pre-disassembly procedures on page
(Removing the CPU heatsink
Removing and replacing components 117
55). Remove the access