Changing boot order
If the RAID array will be a data array, the disk drive with the operating system must appear higher in the
boot order. If the RAID array will be the operating system drive, it should appear higher in the boot order.
To change the boot order:
1.
Press
F10
2.
If first boot, select the desired language and press Enter. English is the default.
3.
Use the arrow keys to highlight Storage>Boot Order, and press Enter.
4.
In the Hard Drive section device names are listed in order of boot. Use the arrow keys to move the
cursor to the device that you want to move. Press
5.
Use the up/down arrow keys to move the device to the desired order location. Press
highlight the device.
6.
Press
F10
7.
Use the arrow keys to highlight File>Save Changes and Exit. Press Enter, then F10.
ENWW
to call up the BIOS Setup utility when booting the system.
to save changes.
Enter
to highlight the device.
Changing boot order 171
Enter
to un-