4. Remove both CD drive bracket screws (T-15 Torx/slotted screws) and
Figure 5-20
Removing the CD Drive
Chapter 5
pull the CD drive out of the chassis assembly as shown in Figure
5-20. Next remove the four CD drive mounting screws (T-10
Torx/slotted screws) as shown in Figure 5-20 and remove the CD
drive from the bracket. You are now ready to attach the CD drive
blank to the CD drive bracket.
Bracket Runner
CD Drive Mounting
Screws (T-10 Torx Screws)
CD Drive Bracket
Changing Your Computer Hardware Configuration
Bracket Screws
(T-15 Torx Screws)
Removable Media Devices
Bracket Guide
CD Drive
123