Displaying And Setting The Fastboot Mode - HP Visualize b1000 - Workstation Owner's Manual

Displaying and Setting the Fastboot Mode

When fastboot is enabled (set to on), your computer does a quick check
of the memory and skips I/O interface testing during its power-on self
tests. This enables you computer to complete its boot process quicker.
The default factory setting is for fastboot to be enabled (set to on). Note
that fastboot can be set using the Boot Console Interface's
Configuration Menu.
When fastboot is disabled (set to off), more extensive memory testing
and I/O interface testing is performed during the self tests, causing the
boot process to take longer.
If you are experiencing difficulty in booting your computer, set fastboot
to off and reboot the system. More extensive testing may reveal the error
condition.
To display the status of fastboot, type the following at the prompt and
press :
Enter
Configuration Menu: Enter command> fastboot
To disable fastboot, type the following at the prompt and press
Configuration Menu: Enter command> fastboot off
To enable fastboot, type the following at the prompt and press
Configuration Menu: Enter command> fastboot on
Chapter 6
The Boot Console Interface
Displaying and Setting the Fastboot Mode
:
Enter
:
Enter
197