HP Visualize b1000 - Workstation Owner's Manual page 97

Changing Your Computer Hardware Configuration
Use the following tools to remove or replace hardware parts when
changing your configuration:
• Light-duty flat blade screwdriver with 150mm (6 inch) long shaft
• T-10 and T-15 Torx drivers. Note that the screws these drivers are
used on have a recessed slot for use by flat-bladed screwdrivers.
• Needle-nose pliers
NOTE Many of the HP-UX commands in this chapter will require that you
become superuser (root). If you cannot log in as root, contact your
system administrator.
Chapter 5 97