Power Management in
Windows 3.1 1
9 After the Power-On Self-Test has completed, press
prompted to use Setup.
10 Set new User and System Administrator Passwords.
11 Press
to save the new passwords and exit Setup.
If Your Application Software Does Not Work
If the PC reports the system is OK and the indicator light over the
power switch is illuminated, but some software won't run:
Check to see if the
•
settings. (Windows 3.11 only). Refer to the operating system and
application software manuals.
If Windows does not run properly, refer to the Windows manual for
•
guidance.
If Power Management Does Not Work
Check that the Sleep icon
If it is absent, click on the File menu in the Program Manager and select
the New option to install
the StartUp group.
Check that Power Management is enabled using the Power icon in the
Windows Control Panel:
1 Double-click on the Power icon in the Windows Control Panel.
2 Check that
Advanced
If the Power icon does not appear in the Windows Control Panel:
1 Exit from Windows.
2 At the MS-DOS prompt, change to the
3 Type
SETUP
field to
MS-DOS with APM
SETUP program to return to the MS-DOS prompt.
file is present with the correct
AUTOEXEC.BAT
appears in the StartUp Windows group.
from the
SLEEP.EXE
is selected in the Power dialog box.
C:\WINDOWS
to run Windows SETUP and set the
. Follow the instructions displayed by the
5 Troubleshooting Your PC
If Your PC Has a Software Problem
when
directory in
C:\WINDOWS
directory.
Computer
English
89