HP Vectra VE 5/xxx - 2 User Manual page 64

After Installing an
Upgrade Processor
3 How to Install Accessories In Your PC
Installing an Upgrade Processor
5 To install the new processor:
a Locate the corner markers:
on the processor—a dot or notch ("broken" corner)
•
on the processor socket—a dot.
•
b Position the processor over the socket, with it's corner marker
facing the corner marker on the socket.
c Place the processor into the socket.
d Lower the lever to lock the processor into place.
e Replace the heatsink and fasten the clip, if the heatsink is not
attached to the processor.
6 Set the switches on the system board for the correct processor
speed. Refer to the section "System Board Connectors and Switches"
on page 104. If you use an Intel Overdrive processor, refer to the
instruction leaflet supplied with the processor to see whether you
should change the position of any switches on the system board.
7 Replace the computer's power supply and cover. Reconnect all
cables and power cords.
Switch on the PC and verify that the new processor is recognized by the
Power-On-Self-Test.
52 English